Atec Agilent-E5071C - Manual (Page 47)

47
Cycle time for measurement completion 1, 2 (ms)
Table 46. Option 2D5/2K5/4D5/4K5
Sweep mode: Stepped, analyzer display turned off with: DISP:ENAB OFF,
number of traces = 1, system error correction: ON
Number of points
51 201 401 1601
Start 300 kHz, stop 20 GHz, 500 kHz IF bandwidth
Uncorrected 11 18 24 56
2-port cal 21 35 48 112
4-port cal 41 69 94 222
Start 300 kHz, stop 20 GHz, 100 kHz IF bandwidth
Uncorrected 11 20 28 69
2-port cal 22 38 54 137
4-port cal 42 75 107 272
Start 300 kHz, stop 20 GHz, 1 kHz IF bandwidth
Uncorrected 60 212 410 1591
2-port cal 120 421 817 3180
4-port cal 237 840 1632 6358
Start 8 GHz, stop 18 GHz, 500 kHz IF bandwidth
Uncorrected 8.4 14 19 48
2-port cal 17 27 38 94
4-port cal 32 52 74 188
Start 8 GHz, stop 18 GHz, 100 kHz IF bandwidth
Uncorrected 8.8 15 22 60
2-port cal 17 30 44 120
4-port cal 34 58 86 237
Start 8 GHz, stop 18 GHz, 1 kHz IF bandwidth
Uncorrected 58 207 405 1583
2-port cal 115 413 807 3163
4-port cal 229 823 1612 6324
1. Supplemental performance data.
2. Measured with fi rmware version A.09.30.