Atec Agilent-E5071C - Manual (Page 6)

6
System dynamic range (continued)
Table 2. Option 2D5/2K5/4D5/4K5
Description Specifi cation SPD
System dynamic range 1, 2
300 kHz to 1 MHz
IF bandwidth = 3 kHz
70 dB
1 MHz to 10 MHz 82 dB
10 MHz to 100 MHz 95 dB
100 MHz to 6 GHz 98 dB
6 GHz to 8.5 GHz 92 dB
8.5 GHz to 10.5 GHz 80 dB
10.5 GHz to 15 GHz 75 dB
15 GHz to 20 GHz 71 dB
300 kHz to 1 MHz
IF bandwidth = 10 Hz
95 dB 105 dB
1 MHz to 10 MHz 107 dB 115 dB
10 MHz to 100 MHz 120 dB 129 dB
100 MHz to 6 GHz 123 dB 130 dB
6 GHz to 8 GHz 117 dB 129 dB
8 GHz to 8.5 GHz 117 dB 127 dB
8.5 GHz to 10.5 GHz 105 dB 115 dB
10.5 GHz to 15 GHz 100 dB 111 dB
15 GHz to 20 GHz 96 dB 105 dB
Figure 2. System dynamic range (specification and actual measurement data example,
IF bandwidth 10 Hz)
1. The test port dynamic range is calculated as the difference between the test port’s rms noise
fl oor and the source’s maximum output power. Effective dynamic range must take measurement
uncertainty and interfering signals into account.
2. The specifi cation might not be met at 5 MHz or 50 MHz.
Frequency [Hz]
S
ys
te
m
dy
n
a
m
ic
ra
n
g
e
[d
B
]
E5071C-2D5/2K5/4D5/4K5 specification
0.0E+00 5.0E+09 1.0E+10 1.5E+10 2.0E+10
80
90
100
110
120
130
140
150
160