B&K Precision 4052-4055 - Programming Manual User Manual

Page 20

Advertising
background image

16

EDGE

<edge>

When carrier wave is NOISE wave, you
can’t set it. When NCYC is selected and
TRSR is set to EXT, you can set it.

TIME

<circle time> When carrier wave is NOISE wave, you

can’t set it. When NCYC is selected, you
can set it.

MTRIG

When TRSR’s parameter be chosen to
MAN, that it can be set.

CARR,WVTP

<wave type>

Value of carrier wave type.

CARR,FRQ

<frequency>

Value of frequency.

CARR,AMP

<amplifier>

Value of amplifier.

CARR,OFST

<offset>

Value of offset.

CARR,SYM

<symmetry>

Value of symmetry.

CARR,DUTY

<duty>

Value of duty cycle.
Only Square can set this parameter.

CARR,PHSE

<phase>

Value of phase.

CARR,DLY

<carr delay>

Value of carrier wave delay. This is
valid only when the carrier wave is
pulse.

CARR VAR

<variance>

Value of carrier wave variance. This is
valid only when the carrier wave is
noise.

CARR MEAN

<mean>

Value of carrier wave mean. This is
valid only when the carrier wave is
noise.




where:

<state>:= {ON,OFF}

<period>:= { Default unit is “S ”. 1us to 500s }

<start phase>:= {0 to 360}

<gate ncycle>:= {GATE,NCYC}

<trigger>:= {EXT,INT,MAN}

<delay>:= { Default unit is "S". 0s to 500s }

<polarity>:= {NEG,POS}

<trig mode >:= {RISE,FALL,OFF}
<edge>:= { RISE,FALL}

<circle time> :={ 1cycle to 50000 cycle}
<wave type>:={SINE ,SQUARE, RAMP,PULSE,NOISE, ARB}
<frequency>:= { Default unit is "HZ". Minimum value is 1xe-6 HZ,
maximal value depends on the version.}
<amplifier>:={Default unit is "V". Channel one
minimum value 0.004V, Maximal is 6V. Channel two minimum value
0.004V, Maximal is 20V. }

Advertising