B&K Precision 4052-4055 - Programming Manual - Manual (Page 22)

18
1.9. Parameter Copy Command
DESCRIPTION copy channel data.
COMMAND SYNTAX
PAraCoPy <destinat channle>, <src channle>
<destinat channle>:= {C1, C2}
<src channle>:= {C1, C2}
Note: the parameters C1 and C2 must be set to device together. C1 is destination channel, C2 is
source charnel.
EXAMPLE 1 Copy parameters from channel one to channel two.
PACP C2,C1
RELATED COMMANDS
ARWV, BTWV, CFG, CPL, MDWV, SWWV, BSWV
1.10. Arbitrary Wave Command
DESCRIPTION Change arbitrary wave type.
COMMAND SYNTAX
<channel>:ARbWaVe {INDEX, NAME}
<channel>:={C1, C2}
<index>: 2 to 60 (see blow table what the index number mean.)
<name>: see blow table.
Index Name Index Name Index Name Index Name Index
Nam
e
2 StairUp 13 LogRise 24
Gmonopu
ls
38 Gausswin 49 Acot
3 StairDn 14 Sqrt 25 Tripuls 39 Triang
50~6
0
User
space
4 StarUD 15 Root3 26 Cardiac 40
blackmanhar
ris
5 PPulse 16 X^2 27 Quake 41 Barthannwin
6 NPulse 17 X^3 28 Chirp 42 Tan
7 Trapezia 18 Sinc 29 Twotone 43 Cot
8 UpRamp 19 Gussian 30 Snr 44 Sec
9 DnRamp 20 Dlorentz 34 Hamming 45 Csc
10 ExpFall 21 Haversi 35 Hanning 46 Asin