B&K Precision 4052-4055 - Programming Manual - Manual (Page 31)

27
1.20. Virtual key command
DESCRIPTION This sends a virtual key command to the device. The keys are
representations of the front panel buttons.
COMMAND SYNTAX
VirtualKEY VALUE,<value>,STATE,<sate>
<value>:= {a parameter from the table below. }
<state>:=<0,1>(The “1” is effective to virtual value, and the “0” is
useless )
KB_CHANNEL 33 KB_NUMBER_1 49
KB_FUNC1 28 KB_NUMBER_2 50
KB_FUNC2 23 KB_NUMBER_3 51
KB_FUNC3 18 KB_NUMBER_4 52
KB_FUNC4 13 KB_NUMBER_5 53
KB_FUNC5 8 KB_NUMBER_6 54
KB_SINE 34 KB_NUMBER_7 55
KB_SQUARE 29 KB_NUMBER_8 56
KB_RAMP 24 KB_NUMBER_9 57
KB_PULSE 19 KB_POINT 46
KB_NOISE 14 KB_NEGATIVE 43
KB_ARB 9 KB_LEFT 44
KB_MOD 15 KB_RIGHT 40
KB_SWEEP 16 KB_UP 45
KB_BURST 17 KB_DOWN 39
KB_STORE_RECALL 10 KB_OUTPUT1 153
KB_UTILITY 11 KB_OUTPUT2 152
KB_HELP 12 KB_KNOB_RIGHT 175
KB_NUMBER_0 48 KB_KNOB_LEFT 177