B&K Precision 4052-4055 - Programming Manual - Manual (Page 24)

20
1.11. Phase Command
DESCRIPTION Set or get phase parameters.
COMMAND SYNTAX INVerT <parameter>
<parameter>:= {OFF, ON}
QUERY SYNTAX INVerT?
RESPONSE FORMAT
INVERT <parameter>
EXAMPLE 1
Set load to invert.
INVT ON
1.12. Sync Command
DESCRIPTION Set signal output from backward panel in phase with forward.
COMMAND SYNTAX
<channel>: SYNC <parameter>
<channel>:={C1,C2}
<parameter>:= {ON,OFF}
QUERY SYNTAX
<channel>:SYNC?
RESPONSE FORMAT
<channel>:SYNC <parameter>
EXAMPLE 1
Sync function on defend of channel one
C1:SYNC ON
EXAMPLE 2 Reads channel one sync state.
C1:SYNC?
Return:
C1:SYNC OFF\n