Clock source command, Frequency counter, Clock source command 1.17. frequency counter – B&K Precision 4052-4055 - Programming Manual User Manual
Page 26
22
QUERY SYNTAX
SCreen_SaVe?
RESPONSE FORMAT
SCreen_SaVe <parameter>
EXAMPLE 1
Set screen save time 5 minutes.
SCSV 5
1.16. Clock Source Command
DESCRIPTION
Set or get signal oscillator resource .
COMMAND SYNTAX ROSCillator <parameter>
<parameter>:= {INT, EXT }
QUERY SYNTAX
ROSCillator?
RESPONSE FORMAT ROSC <parameter>
EXAMPLE 1
Uses system clock source.
ROSC INT
1.17. Frequency Counter
DESCRIPTION
Set or get frequency counter.
COMMAND SYNTAX FreqCouNTer {TRG,<value>,MODE, <value>,HFR,<value>,DEF ,<value>}
<value> = {see below table.}
QUERY SYNTAX
FreqCouNTer? {FRQ, DUTY, TRG, PW, NW, MODE, HFR}
RESPONSE FORMAT
FreqCouNTer <parameter>
Parameters
Value
Description
STATE
<state>
Turn on or off frequency counter
FRQ
<frequency>
Input signal frequency.
DUTY
<duty>
Input signal duty.