MoTeC M880 - Manual (Page 13)

MoTeC Overview 11
Setup Parameters
The Setup Parameters allow the ECU to be configured for almost any engine.
The Setup Parameters include Number of Cylinders, Ignition Type, Sensor
Types, Injector Current, Auxiliary Output Functions etc.
The Setup Parameters must be correct before attempting to start the
engine.
ECU Functions
The ECU’s can perform a large number of functions in addition to the normal
Fuel and Ignition control capabilities including Hi /Lo injection, Individual
Cylinder tables for Fuel and Ignition, Rotary ignition split and various sensor
compensations
The functions are setup using ECU Manager either in the Functions menu,
the Digital Input Functions menu or the Auxiliary Output Functions menu.
Help on each function is available from within ECU Manager by pressing the
F1 key when the appropriate screen is shown.
Tech Notes are available from MoTeC on the more complicated functions
such as Traction Control.
Note that some functions may not be available depending on the ECU Model
and options.
The functions are as follows:
Functions
The following functions are setup in the Functions menu
• Boost Control **
• Warning Alarms **
• Gear Detection *
• Overrun Fuel Cut
• Ground Sped Limiting *
• Gear Change Ignition Cut *
• Boost Enhancement (Antilag) *
• Lambda Control
• Traction Control *
* must also be setup in the Digital Input Functions
** must also be setup in the Auxiliary Output Functions