MoTeC M880 - Manual (Page 19)

MoTeC Software 17
The items to be logged and the logging rates must be setup using the MoTeC
ECU Manager software. This is done in the Data Logging Setup screens.
The ECU will remember the logged data even if the ECU power is turned off.
If the logging memory becomes full the oldest data is overwritten so that
the most recent data is always available.
The ECU must have the Logging option to perform data logging.
Pro Analysis
If the Pro Analysis option is enabled then advanced analysis options such as
Track maps, multiple graph overlays, XY plots, maths functions, advanced
track map analysis. (Available on M800 & M880 only).
Unloading the Logged Data
The logged data can be extracted by connecting the MoTeC CAN Cable to the
ECU and selecting Utilities | Get Logged Data from the ECU Manager
menu.
Data Logging Analysis
The MoTeC Interpreter software may be used to analyse the logged data.
The Interpreter software is supplied separately to the ECU Manager
software.
The Interpreter software makes it easy to analyse mixture readings and other
sensor readings by presenting the data in various graphical formats.
Refer to the Interpreter help screen for more detail.
Telemetry
The MoTeC Telemetry Monitor software may be used to view live information
from the ECU via a radio link.
The Telemetry Monitor software is supplied separately to the ECU Manager
software.
The Telemetry Monitor software shows the ECU data in various graphical
forms including dial gauges, bar graphs and chart recorders.