Auxiliary valves, Ecu mounting, Ecu cleaning – MoTeC M880 User Manual
Page 34
32 Installation
Do not use resistive suppression leads as they will reduce the spark
energy.
Auxiliary Valves
The ECU can control various auxiliary valves such as Idle Speed or Turbo
Boost control valves.
Refer to the appropriate MoTeC drawing for setup and wiring details. Refer
also to any relevant Tech Notes.
ECU Mounting
The ECU should be mounted in an area where the internal temperature of the
ECU will not exceed 85 °C, generally this is in the passenger compartment.
Allow for adequate air circulation around the ECU. The ECU internal
temperature may be viewed using the ECU Manager software or it may be
recorded using the data logging.
Mount so as to minimise vibration, this will help to prolong the ECUs life.
ECU Cleaning
Avoid high pressure washing or degreasing of the ECU.