MoTeC M880 - Manual (Page 14)

12 Overview
Digital Input Functions
The following functions are setup in the Digital Input Functions menu
• Speed Measurement
• Period Measurement
• Pulse Measurement
• Dual RPM Limit
• Air Conditioner Request
• Nitrous
• Nitrous + Dual RPM Limit
• Ignition Switch
• Brake
• Logging Enable
• Clutch
• Beacon
• Power Steering
• Cam Position
• Telemetry Control
• Mass Air Flow Frequency Measurement
• RPM Speed Limiting
Auxiliary Output Functions
The following functions are setup in the Auxiliary Output Functions menu
• Idle Speed Control
• Aux Table Controlled Output
• Tacho Signal
• Drive by Wire Control
• Drive by Wire with Idle Speed Control
• Stepper Idle Speed Control
• Fuel Pump Control
• Thermatic Fan Control
• Air Conditioner Fan Control
• Air Conditioner Clutch Control
• RPM / Load Table Output
• Gear Change Light Output
• Fuel Used Pulse Output
• Slip Warning Output
• Alternator Control
• Spray Bars Output
• Status Output