MoTeC M880 - Manual (Page 62)

60 ECU Manager Software
Layout Objects
To add an object to the layout page select Add from the Layout menu or right
click on an empty space in the layout page and select Add.
To change the properties (settings) of any object right click on the object and
select Properties.
To delete an object right click on the object and select Delete.
Adjust Tables and Adjust Graph Objects
In order to make adjustments the layout page must contain an Adjust Table or
an Adjust Graph or both.
Note that only one Adjust Table and one Adjust Graph are allowed per page.
Adjust Tables
Adjust Tables show the values for the currently selected table and allow
adjustments to be made. They also show axis indicators and a target to help
positioning of the engine operating point.
Adjust Graphs
The table values may also be shown graphically in an Adjust Graph.
The graph may be rotated if necessary by clicking on the rotation buttons or
by holding down the Ctrl key while using the arrow keys.
Graph Table
If there is no graph displayed the table object may be switched between table
mode and graph mode by pressing the G key.