2 correction mode selection – CEMB USA ER100-i (B) User Manual
Page 19
Advertising
![background image](/manuals/326180/19/background.png)
19
Use and Maintenance Manual Rev. 12-2012
ENGLISH
Use of the wheel balancing machine
6.2
CORRECTION MODE SELECTION
Press
from the unbalance measurement screen.
Press the weight symbol in the desired correction position.
If doing the unbalance correction in static mode only, press and hold the outside adhesive weight symbol
for
once or twice (depending on the current correction mode)..
Goes back to the unbalance measurement
screen, automatically recalculating the
unbalance values.
Advertising