1 laser calibration 62, 1 laser calibration, English – CEMB USA ER100-i (B) User Manual
Page 62
Advertising
62
Use and Maintenance Manual Rev. 12-2012
ENGLISH
8.3.1 LASER calibration
Saves the laser calibration values
Confirm
Goes back to the measurement screen
Return to main screen
1. Open the spindle and fit the specific calibration tool as shown in the figure.
Reserved Setup
T
he
Tool
cANNoT
be
fITTed
IN
A
posITIoN
dIffeReNT
fRom
ThAT
INdIcATed
IN
The
fIGuRe
.
A
lWAys
fIT
The
cAp
oN
The
collAR
.
d
o
NoT
peRfoRm
A
bAlANcING
spIN
WITh
The
cAlIbRATIoN
Tool
fITTed
.
1. Close the spindle and the guard and press the
button.
2. Remove the calibration tool and press
3. Press
to save the calibration
4. Press
to exit from the screen.
Advertising