CEMB USA ER100-i (B) - Manual (Page 8)

8
4
2
3
1
Use and Maintenance Manual Rev. 12-2012
ENGLISH
2. Installation
1. Unpack the machine and place the front guard on the
ground with the spindle locking/release pedal, the Zero
Weight lift and the side guard (1).
3. Do not install the machine in an area directly exposed
to sunlight or where there are reflections from the floor.
The machine might malfunction if there is excess light
(3).
2. Absolutely do not force the side column when unloading
the machine from the pallet and be careful with the
electrical wiring (2).
Installation
4. Avoid positioning objects made of a particularly reflecting
material in the areas indicated in gray, as they might
interfere with laser reading (4).