CEMB USA ER100-i (B) - Manual (Page 3)

8.2 GENERAL SETUP 56
8.2.1 General setup 1/3 56
8.2.1.1 Screensaver customisation 58
8.2.2 General setup 2/3 59
8.2.3 General setup 3/3 60
8.3 RESERVED SETUP 61
8.3.1 LASER calibration 62
8.3.2 CC motor calibration 63
8.3.3 Spindle reset 64
8.3.4 Taper calibration 65
8.3.5 Correction weights 66
8.3.6 Wheel runout 67
8.3.7 Outside rim runout 68
8.3.8 Tread 69
8.3.9 Reserved for technical service 70
8.3.10 Saves the machine calibration 70
8.3.11 Loads the user manual 70
8.3.12 Firmware upgrade 71
8.3.13 Factory setting 72
8.4 MACHINE CALIBRATION 73
8.5 DIMENSIONS 74
8.6 SELF-DIAGNOSTICS 75
8.7 OSK 76
8.8 SOUNDS 78
8.9 TRACEABILITY 79
8.10 INSTRUCTION MANUAL 79
9. DIAGNOSTICS 80
10. MAINTENANCE 84
10.1 GENERAL 84
10.1.1 Introductory notes 84
10.1.2 Safety rules 84
10.1.3 Replacing fuses 84