CEMB USA ER100-i (B) - Manual (Page 66)

66
Use and Maintenance Manual Rev. 12-2012
ENGLISH
8.3.5 Correction weights
Decreases the value
Increases the value
Displays a calculator to
enter values directly
Confirms the default parameters
Goes back to the reserved setup screen
Return to main screen
Correctly set the length of the correction weights in order to improve the balancing quality.
Default parameter setting: Resets the default machine settings.
The zinc weights used for balancing generally become very long as the weight increases; in this condition the
weight can no longer be considered concentrated at the barycentre and the effect, for example, is a weight of
only 47 instead of 50 grams.
Correctly setting the length of the correction weights allows the wheel balancing machine to automatically com-
pensate for the fact that all the weight cannot be applied at one point.
T
o obTAIN The besT ResulTs
,
AlWAys use WeIGhTs of The sAme mANufAcTuReR
.
Reserved Setup