CEMB USA ER100-i (B) - Manual (Page 64)

64
Use and Maintenance Manual Rev. 12-2012
ENGLISH
8.3.3 Spindle reset
Resets the spindle reset values.
Displays the spindle reset values saved
Saves the spindle reset values.
Confirm
Goes back to the measurement screen
Return to main screen
1. Lock the spindle without a wheel or tools. Close the guard and press the button
2. View the spindle reset values just read (if necessary for particular tests requested by Technical Service).
3. Press to save the spindle reset values
4. Press to exit from the screen.
Reserved Setup