Hach-Lange POLYMETRON 9245 User Manual - Manual (Page 77)

75
User Setup
7.2.5 Datalogger setup
This option allows you to view data held in the analyzer’s
internal memory.
Select the VIEW DATA option to display the requested data.
All information matching the parameters selected in the VIEW
SETUP
option is displayed on the screen.
If the data covers more than one screen, an Arrow key will be
displayed at the bottom. Use this key to scroll through the
data.
Select the VIEW SETUP option to define the parameters for
the data you wish to view.
The FROM data field is the date (DD/MM/YY) from which you
want to start viewing data.
The AT data field is the time (HH:MM:SS format) from which
you want to start viewing the data.
Set the CH field to All or Channel 1 to view data.
If you wish to see the ALARMS information (both system and
warning alarms), select Yes in this field, or No if alarm
information is not required.