Hach-Lange POLYMETRON 9245 User Manual - Manual (Page 85)

83
User Setup
7.6 Sample channels
7.6.1 Channel activation
Enter the parameters as described in Table 8 on the previous
page.
Press the Enter function key to accept each data element.
On completion, press the Esc function key to return to the
user setup screen.
Select the SAMPLE CHANNELS option to set up the
parameters for the sample channels.
These options allow the activation or deactivation of the
measurement channels, and the assignment of a name to the
channel.
Measurements are only taken on active channels.
As this is a single channel analyzer, the number of channels is
set to 1.
Using the Up and Down Arrow keys, define whether the
channel is active (Activ) or inactive (Inactiv).