Hach-Lange DR 6000 Basic User Manual User Manual
Page 148
English 148
Operating environment
Observe the following points so that the device functions faultlessly and
thus has a long service life.
•
Place the device securely on an even surface. Push no objects
under the device.
•
Position the device so that the power cord is not impaired.
•
The ambient temperature must be 10–40 °C (50–104 °F).
•
The relative humidity should be less than 80 %; moisture should not
condense on the instrument.
•
Leave at least a 15 cm clearance at the top and on all sides for air
circulation to avoid overheating of electrical parts.
•
Do not use or store the device in extremely dusty, humid or wet
places.
•
Keep the surface of the instrument, the cell compartment and all
accessories clean and dry at all times. Immediately remove
splashes or spilt materials on or in the instrument (refer to
Maintenance, page 166
).
Front and back view
Figure 1 Front view
N O T I C E
Protect the instrument from extreme temperatures from heaters, direct sunlight
and other heat sources.
1
USB port type A
5
Touch screen
2
Cell compartment cover
6
Power save key
3
Lamp compartment cover
7
RFID module (not available on all
models)
4
Fan outlet