Hach-Lange DR 6000 Basic User Manual - Manual (Page 169)

English 169
Please insert the USB
memory stick.
Insert a USB memory
stick into a USB A port
on the instrument.
File for instrument
update missing.
Error during update.
Check the USB memory
stick.
File for instrument
update is faulty.
Error during update.
Save the update file
again and repeat the
procedure.
Error copying from USB
memory stick.
Error during update
Start the procedure again
or contact technical
support.
No instrument backup
present! Check the USB memory
stick.
Insufficient memory for
update .
Error during update.
Select a memory with
more space.
Update file is faulty. Error during update.
Save the update file
again and repeat the
procedure.
USB memory stick is
not connected.
Update not possible.
Check the USB memory
stick.
Network connection errors
Please check network
configuration.
Please check the
connection.
Please check the
connection and contact
the administrator.
Network setup or FTP
error
Error when calling up
the local IP address.
Network setup: DHCP
client has no connection
to the DHCP server
Enter the IP address
again.
Error displayed Cause Resolution
Error during default
gateway setup.
Network setup: default
gateway cannot be set
for fixed IP address
Try to create the
connection again.
Error during network
drive setup!
Error during network
setup
The target directory does
not exist.
Check the settings.
Define target directory.
Error during subnet
mask setup.
Network setup: Subnet
mask cannot be set for
fixed IP address
Enter the subnet mask
again.
Error in FTP
connection.
FTP error
Make sure that the
instrument is connected
to the network.
Network switched off.
Network setup off, when
access to instruments
homepage via sidebar
Activate the online
connection.
Remote server cannot
be reached. Error during network
setup
Make sure that the
instrument is connected
to the network.
The fixed address of the
DR 6000 is not accepted.
Remote server
unreachable!
The fixed address of the
DR 6000 is not accepted.
The server name entered
is incorrect.
Switch to "Automatic".
Enter the correct server
name.
Web server cannot be
reached. Instruments homepage
cannot be reached. Try the connection again
later.
Error displayed Cause Resolution