CONTREX M-Traverse - Manual (Page 83)

3 - 36
The Alarm Output allows you to set a high speed RPM indication.
High Speed Alarm (CP-23)
Use the High Speed Alarm (CP-23) parameter to determine the RPM
level that will activate the High Speed Alarm Output. When the
Follower's motor RPM are at or above the value in CP-23, the High
Speed Alarm Output will activate.
The factory default for the Default Alarm Control Parameter is found in Table 3-28. To
modify the default parameter refer to Table 3-29. If you are uncertain how to enter a
Control Parameter, review the
Operations: Keypad section.
Table 3-30 Default Alarm Control Parameter
CP Parameter Name Parameter Value
CP-23 High Speed Alarm 2000
Table 3-31 Entering Alarm Control Parameter
CP Parameter Name Parameter Value
CP-23 High Speed Alarm Enter the RPM limit that will activate the High Speed
Alarm Output.