Multichannel Systems LTP-Director Manual - Manual (Page 15)

Welcome to the LTP-Director
11
3.3.3 Data Acquisition: USB-ME64- / 128- / 256-System
The USB-ME-Systems are stand-alone solutions for acquiring data from 64, 128 or 256 channels.
The hardware replaces the internal data acquisition board MC_Card. The analog input signals
are acquired and digitized by the USB-ME-Systems, and the digitized signals are transmitted to
the connected computer via universal serial bus (High Speed USB 2.0). Thus, it is possible to use
any computer for data processing.
The images schematically depict the connectors of the USB-ME-Data Acquisition devices.
The shown nomenclature will be used later in the text.
USB-ME64-System
USB-ME128-System
USB-ME256-System