Multichannel Systems LTP-Director Manual - Manual (Page 43)

LTP-Director
39
5.2
Running an Experiment in Measurement Mode
5.2.1 Data Display Measurement Mode
In contrast to the "Test Mode", the function of the "Measurement Mode" is the design of
the actual experiment and the recording of data. Data and analysis parameters are displayed.
An experiment can consist of different phases, represented as icons. By activating or deactivating
individual phases, it is possible to design the desired experimental layout. Measurement mode
also includes an online documentation and an automatic generation of a report sheet at the end
of the experiment.
Measurement Display
The design of the main menu in "Measurement Mode" is similar to that of the test mode.
On the left side there is the blue Control Window, besides the Data Display window.
The data display is separated into smaller windows.
Hint: To handle the multiple display features, for example, scrolling and zooming, please read
chapter "General LTP-Director Software Features".