Multichannel Systems LTP-Director Manual - Manual (Page 29)

25
5 LTP-Director
5.1 Preparing an Experiment in Test Mode
5.1.1 Data Display Test Mode
On the left window pane of the main window there is the blue control window for setting up
the experimental conditions. On the right window pane you see the data display for the electrode
field. The data display will change when you select a different MEA layout.
In test mode you can define the stimulation electrodes for one or two independent pathways and
select up to four electrodes for online analysis. You can define maximal two stimulation pathways
and maximal four electrodes, which are analyzed online in measurement mode.
5.1.2 Toolbar
This is the common toolbar for the main windows of LTP-Director in test and measurement mode.
File menu and Templates
Experimental settings can be saved in template files. Template files have the extension "*.let".
To open a template file, please click the icon "File Open" or click on the menu. You will have
three options: "Exit", "Save Template", and "Open Template". In test mode the options
"Save Template” and "Open Template" are not available.