Multichannel Systems LTP-Director Manual - Manual (Page 4)

LTP-Director Manual
iv
5.2
Running an Experiment in Measurement Mode 39
5.2.1 Data Display Measurement Mode 39
5.2.2 Control Window Measurement Mode 41
5.2.3 Test Mode 42
5.2.4 Lab Book 42
5.2.5 Preparation 45
5.2.6 Experimental Protocol in Measurement Mode 48
5.2.7 Report Sheet 54
5.2.8 Recording Check List 55
6 LTP-Analyzer 57
6.1 Replaying an Experiment in Raw Data Mode 57
6.1.1 Data Display Raw Data Mode 57
6.1.2 Control Window Raw Data Mode 58
6.2 Analyzing an Experiment in Analysis Mode 62
6.2.1 Data Display Analysis Mode 62
6.2.2 Control Window Analysis Mode 66
7 General LTP-Director Software Features 69
7.1 Display Toolbar for Single Channel View 69
7.1.1 Scrolling and Zooming 69
8 Signal Detection 73
8.1 Signal Detection 73
9 Troubleshooting 77
9.1 About Troubleshooting 77
9.2 Error Messages 77
10 Appendix 79
10.1 Contact Information 79
11 Index 81