Multichannel Systems LTP-Director Manual - Manual (Page 33)

LTP-Director
29
5.1.3 View
Click "View" in the main menu toolbar.
Click "Load Image".
It is possible to load a photo as background picture into the electrode field of the "Test Mode
Control Window". You have the direct optical control of the position of your stimulation and
recording electrodes.
Click "Load Image" and open an image file in a new window. The image has to be correct
orientated! To arrange the picture in relation to the electrodes, click on two electrodes and
type in the corresponding electrode number in the popup field. The image will be fitted to
the electrode grid and put in the background. To discard the image use "Unload Image".
Click "Experiment Comment".