Multichannel Systems LTP-Director Manual User Manual
Page 82
Advertising
LTP-Director Manual
78
LTP-Director: Data Display Test Mode
The amplitude of the stimulus test pulse has to be an integral number in a range
between 0 and 8000 mV. Please select an appropriate value.
LTP-Director: Data Display Measurement Mode
Parameter Window
When running an IO curve under "Preparation" in measurement mode, the program will
try to fit the data to a sigmoidal function. If the data is not sigmoidal, you will receive the
error message "Unable to fit data" shown above. Please try to change the minimal and
maximal stimulation strength to circumvent the problem.
Advertising