Multichannel Systems LTP-Director Manual - Manual (Page 46)

LTP-Director Manual
42
Table for overview:
The table below the modules for experimental proceedings gives an overview about the
stimulation electrodes, the experimental timing of each phase, and about the experimental time
in total. When starting more than one instance of LTP-Director the number of the currently used
instance is additionally displayed.
5.2.3 Test Mode
It is not possible to change stimulation electrodes or analysis electrodes in measurement mode.
If you want to change these, you have to go back to test mode. Click the icon "Test Mode".
The display will change accordingly to the main window of test mode, and you are able to do
the desired settings.
5.2.4 Lab Book
The lab book is the online documentation for the experiment, that will be saved together with
the recorded data, and visualized in the Report Sheet. All entries in the laboratory book from
"General", "Animal", "Slice", "MEA" and "Perfusion" tab will be stored in the XML file
with the extension "*.ldf". As most of the entries in the lab book will often be the same for
each experiment, they can be saved in a template file (see "File Menu and Templates").