Multichannel Systems LTP-Director Manual - Manual (Page 31)

LTP-Director
27
In the "Hardware Configuration" drop down menu you can switch between Simulation and
all data acquisition systems connected to your computer. The window beneath shows the
serial number of the selected device. In this dialog you also specify the "Input Voltage Range",
the "Sampling Frequency", and factor of the "Amplifier Gain".
Click "Perfusion" tab under "Hardware" in "Settings".
The ”Perfusion” option gives the possibility to define, whether you apply the drugs manually
or you are using an automated system for drug application, for example the PPS5-System.
For automated application, please read chapter “Automated Perfusion System”.
To select the parameters of the Savitzky-Golay filter used for signal detection, please
click "Filter" under "Settings".