Multichannel Systems LTP-Director Manual - Manual (Page 78)

LTP-Director Manual
74
If the three point pattern matches more than once for the signal, the other matches are
marked in the signal trace as well. For the analysis of the signal parameters the pattern
with the maximum amplitude is used for calculation.
EPSP or PS Amplitude
For calculation of the amplitude either somatic or dendritic, the distance between baseline
and absolute maximum or minimum point is the background.
EPSP or PS Latency
The latency of a detected EPSP or PS spike is the time distance from the event of the stimulus
to the middle extremum point. EPSP Latency and PS Latency values are in units of ms.