Diamond Products SK-B - Manual (Page 4)

6DIHW\ LQVWUXFWLRQV
Wire sawing system
6.%
page 4 SK-B_0008_e.mif
1 Safety instructions
1.1 Fundamentals
Qualification of operating personnel
Machining concrete is neither simple nor
without risk. Material assets on the site, the
machine itself and the safety of people are at
stake.
The operating personnel has therefore to be
trained by experienced specialists.
HYDROSTRESS can support you in your
training.
Only specially trained and qualified personnel
may carry out maintenance and repair work
and any other work on the following
components:
l electric equipment
l hydraulic equipment
Read the manual and inform your staff!
This manual contains important information on
how to operate the machine safely and
efficiently.
The owner of the machine must make sure
that the instructions in this manual are followed
by any person having anything to do with the
machine, the auxiliary and operation
equipment.
The manual must be accessible on the site at
all times.
Hazards on the building site
The machine has been built in accordance
with state-of-the-art standards and the
recognized safety regulations. Nevertheless,
its use may constitute a risk to life and limb of
the user or of third parties, or cause damage to
the machine and to other property.
Pay attention to the special working conditions
on the building site. Protect yourself and
others within your responsibility against the
many hazards!