Diamond Products SK-B - Manual (Page 44)

7KH GLDPRQG ZLUH
Wire sawing system
6.%
page 44 SK-B_0008_e.mif
Insert the pressing jaws
l Open the link and the pressing jaw holder
l Completely engage the pressing jaws
Press the links
l Close the pressing jaw holder and link
l Place the sleeve completely onto the end of
the wire and place into the tongs
l Actuate the pressing lever several times
until a "click" is audible, repeat three times
l Actuate the reset lever
l Open the link and the pressing jaw holder
With knuckle links: Use the pressing holder.
Also refer to the section "Mounting device
for knuckle links".