Class 3400 meter – E-Mon E34-6003200R*KIT User Manual
Page 31
Advertising
CLASS 3400 METER
31
62-0391-01
NOTE: One set of current sensors equates to three sensors, one per phase. The
multiplier only applies when extra sets of current sensors are installed on one
meter. If you are using only one set of three current sensors, the multiplier is
not required.
Fig. 17. Multiple-load Wiring Diagram.
LINE VOLTAGE
ØA
ØB
LOAD SOURCE
N
LOAD A
LOAD B
CURRENT SENSORS
LOAD SOURCE
ØA
ØB
N
M31603
ØC
ØC
ØAØB ØC
ØA
ØB ØC
W B W B W B
N
Advertising
This manual is related to the following products: