E-Mon E34-6003200R*KIT - Manual (Page 36)

CLASS 3400 METER
62-0391-01 36
10.0 CLASS 3400 METER FEATURES
(CONTINUED)
Display Hold Feature
You can “lock” the scrolling display so that it will stay locked on any one of the 7
screens. On the inside of the door, locate the 4 buttons at the top of the Display Board:
Down, Up, Select and Menu.
To stop the display from scrolling, follow these instructions:
The Select button is used to lock the meter’s display so that it stops scrolling and the
display remains on one screen.
Use the Up and Down buttons to choose which of the 7 screens you would like to
display.
Press the Select button. At the top of the display, you will see the message
HOLD1. This will lock the display for 1 HOUR.
Note: The display hold feature has different selectable time periods.
Pressing Select again will show the message HOLD6. This will lock the display for 6
HOURS.
Continuing to press the Select button will provide additional timing choices:
HOLD12: Locks the display for 12 HOURS
HOLD24: Locks the display for 24 HOURS
HOLD: Locks the display indefinitely
To exit the HOLD mode:
Press the Select button as many times as needed until the HOLD message disappears
from the display, or simply press the CPU RESET button located near the right center
of the CPU board.
** Be sure to exit from the HOLD mode when you are done using this feature.