Fairbanks FB3000 Kernel Program Operators Manual - Manual (Page 15)

Section 3: Key Functions and Menus
04/12 15 51147 Rev. 3
3.2. GENERAL PROGRAMMING MENUS
The programming menus which contain all of the parameters for the system are listed
below.
Options Menu
This is the main menu, used to gain access to
other system menus for configuration and
calibration.
• It is accessible without a password by pressing
the
MENU key.
• Access provided for Weights and Measures
Official to view the
Audit Trail for calibration
and configuration changes.
• Quick access to electronic Operators’ Manual.
Configuration Menu
This menu is used to access diagnostics utilities
and communications programming.
• Optional programmable password protection.
Service Menu
This menu is used to program the metrological
parameters of the system, such as
scale
capacity, calibration , and graduation size.
• Must be password protected for all Legal For
Trade applications.
The Service Menu functions are used by
Fairbanks Authorized Service Personnel
ONLY.