System boot-up procedure, Fairbanks logo – Fairbanks FB3000 Kernel Program Operators Manual User Manual

Page 38

Advertising
background image

04/12

38

51146 Rev. 3

Section 5: Operation

5.1. SYSTEM BOOT-UP PROCEDURE

Initiate the power up sequence using the power

ON/OFF

rocker switch located on

the bottom-left side of the instrument.

Normal indications include the following:

─

Lights on the keyboard should blink.

─

After approximately one minute, the

Fairbanks Logo

appears along

with a mouse pointer, located approximately in the center of the screen.

─

The

Fairbanks Logo

disappears.

─

A Windows welcome screen appears.

─

Lastly, a weighing application window appears.

Advertising