Fairbanks FB3000 Kernel Program Operators Manual - Manual (Page 39)

Section 5: Operation
04/12 39 51147 Rev. 3
5.2. VIEWING OPTIONS
When using the Kernel Program , there are two viewing options for weighing.
The GTN Screen
The GTN Screen displays the weighments for only .one scale at a time.
Multi-scale Screen
The Multi-scale Screen displays all configured scales on the screen at one time.
─ The Golden Diamond show which weighment is being used
─ The scale being used is identified in the lower-left corner of the screen.
5.3. GROSS WEIGHING
21. Press the ZERO key to zero the scale.
22. Place the object to be weighed on the platform.
23. View the weight from the screen.
NOTE: The Operating Mode is Service-Programmable only .
The GTN Screen application The Multi-Scale Screen application