Fairbanks FB3000 Kernel Program Operators Manual - Manual (Page 30)

Section 4: Input/ Output (I/O)
04/12 30 51147 Rev. 3
4.3. 20 MA SERIAL CURRENT LOOP PROGRAMMING
Procedure steps skipped or omitted during this process may cause certain features to
not operate or function as expected. The 20 mA output is passive.
Note: The PC104 Weight Controller Kit (27104) must be installed for this output to
be available.
Procedure:
1. In the Kernel Weighing
Program, click the MENU
button to open the Configuration
Menu.
2. Open the Remote Display .