Fairbanks FB3000 Kernel Program Operators Manual - Manual (Page 43)

04/12 43 51146 Rev. 3
Section 6: Service & Maintenance
IMPORTANT PRECAUTIONS
Electrostatic Discharge (ESD) can easily damage the FB3000 board assemblies.
6.1. TROUBLESHOOTING
Error Condition(s) Solution(s)
•
Check that scale is empty.
•
If Scale is empty, Call for
Service.
•
Load Cell(s) bad.
•
A large amount of weight is zeroed.
•
This is normal.
•
Press OK and continue weighing.
•
Possible load cell damage.
•
Call for Service.
•
Load Cell Failure(s)
•
Flashing and displays “
- - - -
“
•
Possible load cell damage.
•
Call for Service.
•
Access the Load Cell Diagnostics Menu to verify the
load cell status.
•
Count stability or change of counts.
•
Contact the local service for further trouble-shooting.
SC Cells Found None •
Possible damaged load cell cable.
•
Load cell shortened.
•
Defective Pit Power Supply.
•
Defective Smart Sectional Controller(s).
•
Defective Analog Assembly.
•
Call for Service.
Displays “
- - - -
“ ~ lb GROSS
•
Communication error to load Cells.
•
Call for Service.