Fairbanks FB3000 Kernel Program Operators Manual - Manual (Page 18)

Section 4: Input/ Output (I/O)
04/12 18 51147 Rev. 3
4.2.4. Load Default Data Protocols
When programming a Output Data String, the Fairbanks’ FB3000 has five of the
most commonly used pre-configurations, known as
Load Defaults . These data
strings are listed below:
Fairbanks <STX><A><B><C><GGGGGG><TTTTTT><CR>
Toledo <STX><A><B><C><GGGGGG><TTTTTT><CR>
Cardinal
<CR><P><WWWWWW><m><SP><U><SP><g><SP><SP><ETX>
Weightronix < ><M><WWWWWW>< ><U><CR><LF>
Condec <STX><P><WWWWWWW><U><G><M><CR>
4.2.5. Load the Default COM Settings
Follow these steps to configure the Load Default into the Output Data String.
1. From the Weighing Application
Window, press the MENU button,
from the Kernel Options Menu, select
Configuration Menu .
2. Select Configure Output. .