Gentec-EO PC-Gentec-EO (for MAESTRO and INTEGRA) - Manual (Page 15)

PC-Gentec- EO User’s Manual Revision 5.0 14
“Save statistics to the acquisition file” in the Statistics option tab
Changing the duration settings of the acquisition will automatically change
the duration settings of the statistics.
The acquisition produces an “*.acq” file which can be directly drag-and-
dropped to an already opened Microsoft Excel sheet or Notepad.
A new acquisition will not concatenate the new data with the old one, it will
erase old data and save only the new one. You must change the file name
to save the previous and current acquisition.
3.1.2.3.1 Set your Acquisition parameters in Power Mode
In Power Mode, you can use the
“Set Acquisition” tab to choose the sample rate and duration of an
acquisition. The sample rate is defined as a specific number of measurements in a fixed interval (for
example: 3 measurements/minute or 100 measurements/hour). The total duration can also be set in
seconds, minutes, hours and/or days. The filename for data logging, the file location and the option to add
a timestamp to each value can also be set using this menu.
Fig. 3-6 Acquisition settings options in Power mode