Gentec-EO PC-Gentec-EO (for MAESTRO and INTEGRA) - Manual (Page 35)

PC-Gentec- EO User’s Manual Revision 5.0 34
2. Press Enter or Tab to make the change effective
Warning
Statistics in PC-Gentec-EO are calculated from all the entry points coming
from the serial port of the Gentec-EO device. Depending on the device,
this can be different from the number of points received by the monitor.
Please refer to the specifications in section 1.2.
Tip
For MAESTRO users who want to accumulate statistics from all acquired
points at rates greater than 500 Hz must use a monitor, such as a
MAESTRO and use it statistics directly on a MAESTRO and store them to
a USB key.
Fig. 5-18 Statistics display options panel in Energy mode
5.6.2.1 Continuous and Fixed statistics duration mode
In both statistics modes, the statistics start and reset with the
“Start Statistics” button in the controls
section of ribbon bar, or with the button at the top right corner in the statistics graph panel.
The difference between the Fixed and the Continuous modes is that, in the Fixed mode, the statistics will
stop automatically after the duration period. With the Continuous mode, the statistics, after the duration
period has ended, will automatically reset and start again with the same duration period. This will continue
until the stop button is pressed.