Gentec-EO PC-Gentec-EO (for MAESTRO and INTEGRA) - Manual (Page 63)

PC-Gentec- EO User’s Manual Revision 5.0 62
9 USB DRIVER INSTALLATION
Both USB drivers will install a virtual com port on your PC.
MAESTRO:
1. On the Gentec-eo CD, run the USB-Driver Installer Rx.x.xx.exe in the USB Driver folder.
Integra:
1. Go to your computer’s System window by holding the windows key and pressing the Pause/Break
key
2. Select the Device Manager in the lefthand side menu.
3. In the Device manager, select the Integra USB device.