Gentec-EO PC-Gentec-EO (for MAESTRO and INTEGRA) - Manual (Page 33)

PC-Gentec- EO User’s Manual Revision 5.0 32
Warning
Statistics in PC-Gentec-EO are calculated from all the entry points coming
from the serial port of the Gentec-EO device. Depending on the device,
this can be different from the number of points received by the monitor.
Please refer to the specifications in section 1.2.
Tip
For MAESTRO users who want to accumulate statistics from all acquired
points at rates greater than 500 Hz must use a monitor, such as a
MAESTRO and use it statistics directly on a MAESTRO and store them to
a USB key.
The statistics available depend on the type of detector that is plugged, as can be seen in the pictures
below.
Fig. 5-15 Statistics display in Power mode