Ransburg Evolver Solvent Applicator 79190-XXXXXXXX - Manual (Page 18)

13
Evolver Solventborne Robotic Atomizers - Introduction
79190-XXXXXXXX
EVOLVER GUN ASSEMBLY
The gun assembly is designed to connect to hollow
wrist robots. A low voltage control cable is supplied
with the gun to connect the cascade to the MicroPak
power supply.
The "Paint In" lines come in both 3/16" ID and
1/4" ID shielded or non-shielded.
Figure 3: Tool Center-Point
Tool Center-Point
Figure 3 shows the tool center-point information for
the four guns. They are all based upon a 10" (245mm)
target distance.
AA-03-02.11