Ransburg Evolver Solvent Applicator 79190-XXXXXXXX - Manual (Page 9)

4
Evolver Solventborne Robotic Atomizers - Safety
AREA
Tells where hazards
may occur.
HAZARD
Tells what the hazard is.
SAFEGUARDS
Tells how to avoid the hazard.
Spray Area /
High Voltage Equipment
Personnel Safety Skin puncturing by sharp elec- Take precautions to see that flesh is not punctured by
sharp electrode.
There is a high voltage device that
can induce an electrical charge on
objects which is capable of igniting
coating materials.
Inadequate grounding will cause
a spark hazard. A spark can ignite
many coating materials and cause
a fire or explosion.
Parts being sprayed must be supported on conveyors
or hangers and be grounded. The resistance between
the part and ground must not exceed 1 megohm.
All electrically conductive objects in the spray area, with
the exception of those objects required by the process
to be at high voltage, must be grounded.
Any person working in the spray area must be ground-
ed.
Unless specifically approved for use in hazardous loca-
tions, the power supply and other electrical control
equipment must not be used in Class 1, Division 1 or
2 locations.
Robot Work Area-
General Use and
Maintenance
Improper use or maintenance can
lead to hazardous conditions, par-
ticularly from unexpected robot
manipulator movement.
Applicator adjustments or maintenance should be done
after the robot is taken out of service. Do not adjust or
repair the applicator if the robot is operating or stand-
ing ready to start.
Refer to robot operating instructions for the procedures
to take the robot out of service.
AA-03-02.11