Installation, 1 transportation – IAI America RCP2-BA7U User Manual
Page 28
2. Installation
22
2. Installation
2.1 Transportation
[1] Handling of the Robot
Unless otherwise specified, the actuators are packaged individually.
(1) Handling the Packed Unit
�
Do not damage or drop. The package is not applied with any special treatment that enables it to
resist an impact caused by a drop or crash.
�
An operator should never attempt to carry a heavy package on their own. Also, use an
appropriate way for transportation.
�
Keep the unit in a horizontal orientation when placing it on the ground or transporting. Follow the
instruction if there is any for the packaging condition.
�
Do not step or sit on the package.
�
Do not put any load that may cause a deformation or breakage of the package.
(2) Handling the Actuator After Unpacking
�
Do not attempt to carry the actuator by holding a cable or move it by pulling a cable.
�
Hold the base part and the bracket when transporting the actuator main body.
�
Do not hit or drop the actuator during transportation.
�
Do not give any excessive force to any of the sections in the actuator.