IAI America RCP2-BA7U - Manual (Page 43)

4. Maintenance Inspection
37
4.6 Grease Supply to the Guides
4.6.1 Grease to Apply
Lithium grease No. 2 is used on the guides.
The following grease is applied when we ship the unit.
Idemitsu Kosan Daphne Eponex Grease No.2
Other companies also sell a grease similar to this. If ordering from another maker, give the name of this
product and request something comparable.
4.6.2 How to Apply the Grease
1) Remove the side covers on both sides.
2) When greasing the guide, use a spatula or grease applicator to squeeze or inject grease into the
space between the slider and base, and then move the slider back and forth several times to let
the grease spread evenly. Remove excess grease.
3) Follow the same steps to apply grease on the other guide
4) Install the side covers.
Warning: Do not attempt to apply fluorine and lithium grease. When mixed with lithium
grease, not only decrease the grease characteristics, but also may damage the
actuator.
Caution: In case the grease got into your eye, immediately go to see the doctor to get an
appropriate care.
After finishing the grease supply work, wash your hands carefully with water and
soap to rinse the grease off.